Sata Hard Drive ... A G O N Y . . . Aarrrggh ! ...? - sata hard drive disk may be the
Check this out. I formatted hard disk SATA is used (with the Dell PC) came and said it was flat in good condition and ready for use. Ok. Clean your PC from Dell, and began a copy of XP Pro perfectly with the key code legitimate and press Enter to load Windows to invite you ... said:
Setup did not install hard drive on your computer. Blah, blah, blah, blah ... Setup can not continue. To end the program. Press F3.
What you bee problem. Not happy at this moment in time. Thank you and exciting for each answer, which help to solve this problem.
Sunday, December 13, 2009
Sata Hard Drive Disk May Be The Sata Hard Drive ... A G O N Y . . . Aarrrggh ! ...?
Subscribe to:
Post Comments (Atom)
4 comments:
I'm sorry, the question at the top of your question, but was just curious ... When you turn on your PC, press the button to access the BIOS setup screen? For example, can (and do not flash me, and fast, so fast!) Mine is the F1 key to configure, restore, and other F10 key to something else (never too early to see, LOL!).
Ok! Gossip enough, sorry! Anyway, if you have your PC, ready to quickly setup button that you use the BIOS screen (F1, heads, for example, press, if applicable). Then, when the BIOS screen test system, and to ensure that the recognition of the unit. Use the right arrow button or tab to save the end and leave the changes and restart. Your computer should now restart, as usual, and go through the commands of the normal CD. Then, after the drive is recognized in BIOS and reboot your system, you should run on your hard disk to install Windows as usual, the following steps and instructions accordingly.
I'm sorry, the question at the top of your question, but was just curious ... When you turn on your PC, press the button to access the BIOS setup screen? For example, can (and do not flash me, and fast, so fast!) Mine is the F1 key to configure, restore, and other F10 key to something else (never too early to see, LOL!).
Ok! Gossip enough, sorry! Anyway, if you have your PC, ready to quickly setup button that you use the BIOS screen (F1, heads, for example, press, if applicable). Then, when the BIOS screen test system, and to ensure that the recognition of the unit. Use the right arrow button or tab to save the end and leave the changes and restart. Your computer should now restart, as usual, and go through the commands of the normal CD. Then, after the drive is recognized in BIOS and reboot your system, you should run on your hard disk to install Windows as usual, the following steps and instructions accordingly.
Hello,
How old is the SATA drive. Over the days that the children of the SATA technology, a few floppy disks to install Windows drivers, could see that the hardware device. It ATAPI.SYS driver of it.
If you are on the website of the reader the most important PC manufacturers SATA visit should be able to download these drivers and install them on a floppy disk or, if you've read a hard drive / writer, pen drive or another.
In the old days, you start the computer reformatted, and press F6 to the hard drive to get the driver to install a file, Windows will come into play, and install hardware and to be recognized.
Regards,
TgTips
Hello,
How old is the SATA drive. Over the days that the children of the SATA technology, a few floppy disks to install Windows drivers, could see that the hardware device. It ATAPI.SYS driver of it.
If you are on the website of the reader the most important PC manufacturers SATA visit should be able to download these drivers and install them on a floppy disk or, if you've read a hard drive / writer, pen drive or another.
In the old days, you start the computer reformatted, and press F6 to the hard drive to get the driver to install a file, Windows will come into play, and install hardware and to be recognized.
Regards,
TgTips
Post a Comment